Home

• 1 Frequency 12 kHz (SNSt protocol);
• 1 Working segment screen;
• Non-sleep transmitter mode;
• Compatible with all t-series transmitters;
• Depth up to 9,90 m;
• Transmitter working time – 20 hours;
• Angle accuracy 0,1%.

The warranty period for the systems is 1 year

• Noise stable p SNS;
• 2 (12, 30 kHz) or 7 frequency (2, 8, 12, 18, 24, 30, 41 kHz);
• Depth with wireless transmitter is up to 45 m;
• 3 power modes of the transmitter;
• Noise test for choosing better frequency on jobsite;
• Predicted depth to drill on target;
• Permanent displaying current depth, distance and all
  needed info;
• Switching to any frequency in drilling process;

The warranty period for the systems is 1 year

Walkover locating system with cable and pipe seek function

• Noise stable p SNS;
• 7 frequency (2, 8, 12, 18, 24, 30, 41 kHz);
• Depth with wireless transmitter is up to 70 m;
• 3 power modes of the transmitter;
• Noise test for choosing better frequency on jobsite;
• Predicted depth to drill on target;
• Permanent displaying current depth, distance and all
  needed info;
• Switching to any frequency in drilling process;
• Passive cable detection for industrial frequencies 50,
  60, 100, 120 kHz;*
• Ultrasonic sensor to measuring receiver distance from
  the surface.

The warranty period for the systems is 1 year

This system was built to control HDD process with big depth and length. Working principle is based on measuring of gravity and magnetic field of the Earth using special sensors in the probe. All data goes by cable to the Interface module of the system for decoding. From module data goes to PC where it is calculating to define depth, probe position, angle etc. Final information is assembling to convinient table and goes to Control Panel of Drillmaster.

Seek generator created for creating AC with setted frequencies in steel communication (pipe). Generator and all needed accessories are put down to shock-proof case.

Full-functional Repeater-Tablet

• Dimensions: 215 x 135 x 20 mm, 8-inch screen
• Shock-, dust-, moisture-proff
• OS – Android
• Power source: 5V, 2A. Self battery – 7400 mA/h
• Kit:
  Repeater, leg, antenna, 2 cables, car adapter

Telemetry :

• Power level of transmitter;
• Power level of Repeater;
• Transmitter temperature;
• Angle (%,∠);
• Locating line, clockface position, locating points, # of shot;
• Predicted depth (only at front (F) point);
• Current depth;
• Horizontal distance Receiver Transmitter.

Graphic Editor :

• Surface profile
• Project trajectory
• Obstacles;
• Actual drilling trajectory
• Actual surface profile
• Double window view

Main Menu :

• Operations with project
• Project export
• Drilling reports
• Possibility to add comments
• GPS coordinates

• Transmitter angle;
• Transmitter battery;
• Transmitter temperature;
• Repeater power;
• Telemetry status;
• Predicted depth (in the vicinity of the Front point);
• Current depth;
• Horizontal distance to the transmitter.

Additional outside antenna that increases telemetry between Receiver and Repeater. Each Relay increases distace of transfering signal by 500 meters. Relay also helps to keep telemetry when there is no direct vision between Receiver and Repeater.

Hardware-software complex that make Repeater from your Android device. It helps to keep Clients money on one side and make drilling process for operator more comfortable on another. Machine operator can choose convenient dimensions of the Android device and type of fixing it on panel.